factory customized Plastic Blow Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Accumulating Blow Molding Machine, Sea Ball Blow Machine, Jar Making Machine, All the time, we have been paying attention on all details to insure each product satisfied by our customers.

factory customized Plastic Blow Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva Detail:

TECHNICAL SPECIFICATION

Category	Item	Unit	1L-4	2L-3	5L-2	12L-2
Basic Specification	Raw Material	—	PE/PP
	Dimension	m	5.3×3.5×2.4	5.3×3.5×2.4	5.3×4.5×2.4	6.0×3.8×2.4
	Total Weight	T	8	12	12	12
	Product Capacity	ml	1000	2000	5000	12000
Extrusion System	Diameter of screw	mm	90/80	90/80	90/80	100/90
	Screw L / D ratio	L/D	25:1/23:1	25:1/23:1	25:1/23:1	28:1/25:1
	Number of heating zones	pcs	5	5	5	7
	Extruder drive power	KW	30/22	30/22	30/22	45/30
	Plasticizing capacity	kg/h	120	120	120	160
Die Head	Heating zones	pcs	5	7	5	5
	Number of cavities	一	4	3	2	2
	Center distance	mm	150	190	240	280
Clamping System	Clamping distance	mm	200	200	250	350
	Sliding distance	mm	700	700	650	800
	Open stroke	mm	240-440	240-440	230-480	330-680
	Clamping force	kn	125	125	125	180
	Air pressure	Mpa	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Power consumption	Air consumption	m³/ min	0.9	0.9	0.9	1
	Cooling water consumption	m³ / h	1.5	1.5	1.5	1.8
	Oil Pump power	KW	11	15	15	18.5
	Total power	KW	72-78	72-78	72-78	88-113

TECHNICAL SPECIFICATION

1.lt is suitable for producing 1L-12L fuel bottle, lubricating oil bottle, etc.
2.Smooth treatment inside the die head with no dead angle in the curve flow runner gives good effect to smoothness and no lines outside and inside the finished products.
3. The effect of multi-layer co-extrusion, with the option of visible line design in the finished product, ensures uniform thickness in layers and the 入-shaped flow runner design inside die head, with less than two hours of color change, create translucent and straight visible line with even width top and bottom.
4. Machine can be equipped with auto deflashing, take-out units for finished product, conveyors for waste material and finished product, in-mould label and leak tester.
5. This model can be upgraded into Hybrid Type” , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould.

Factory Workshop

Our Service

Reply the request and take action in24 hours.

Blowing mould and injection mould made at TONVA original company.

100% Quality inspection before the shipment.

Auxiliary machine for complete line.

Provide training service in TONVA company or clinet’s factory.

Customized design is available as requirements.

Engineer for overseas installation is available

Provide consultation service in request.

Sample Room

Custormers

Service Marketing Network

Our machine has been serving customers all over the world.

Packaging & Logistics

Product detail pictures:

Related Product Guide:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, have confidence in the very first and management the advanced" for factory customized Plastic Blow Molding - FUEL BOTTLE CHEMICAL DRUM CIVIL BARREL MACHINE – Tonva , The product will supply to all over the world, such as: panama, Tajikistan, Bangkok, our qualify products have good reputation from the world as its most competive price and our most advantage of after-sale service to the clients.we hope we can provide a safe, environmental products and super service to our clients from all of the world and establish strategic partnership with them by our professional standards and unremitting efforts.

5 Ltr Blow Moulding Machine