Factory For Wet Tissue Bottle Blowing Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva
Factory For Wet Tissue Bottle Blowing Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva Detail:
TECHNICAL SPECIFICATION
| Category |
Item | Unit |
1L | 2L |
3L |
5L |
12L |
20L |
30L |
| Basic Specification | Raw Material |
— |
PE/PP/PA/PVC etc | PE/PP/PA/PVC etc | |||||
| Dimension |
m |
2.7×1.6×1.9 |
3.1×2.0×2.0 |
3.2×2.0×2.0 |
3.5×2.1×2.1/3.7×3.0×2.1 | 4.3×3.5×2.2/4.6×4.4×2.2 |
5×5.9×2.35/5×6.5×2.4 |
53×6.4×2.4 |
|
| Total Weight |
T |
2.3Z4.2 |
3.2Z6.5 |
3.4Z6.8 |
4.878.5 |
12/13 |
17/18.5 |
20 |
|
| Extrusion System | Screw motor |
KW |
7.575.5 |
15/7.5 |
18.5/15 |
22/18.5 |
30(37)/22 |
55/37 |
75/55 |
| Diameter of screw |
mm |
55/45 |
65/55 |
70/65 |
80/70 |
90/80 |
100/90 |
110/100 |
|
| Screw L / D ratio |
L/D |
23:1/23:1 |
25:1/23:1 |
23:1/25:1 |
23:1/23:1 |
25:1(28:1)/23:1 |
28:1/28:1 |
28:1/28:1 |
|
| Extruder heating power |
KW |
7 |
15 |
18 |
20 |
23 |
28 |
30 |
|
| Number of heating zones |
pcs |
3 |
3 |
3 |
4 |
5 |
7 |
8 |
|
| Plasticizing capacity |
kg/h |
55 |
70 |
75 |
95 |
120/130 |
160 |
180 |
|
| Die Head | Heating zones |
pcs |
3-5 |
3-7 |
3-7 |
3-9 |
3-12 |
3-11 |
3-5 |
| Heating power |
KW |
1.5-3 |
2-4.5 |
2.5-5 |
3-6 |
5-9.5 |
8-14 |
10-12 |
|
| Number of cavities |
— |
1-4 |
1-6 |
1-6 |
1-7 |
1-10 |
1-5 |
1-2 |
|
| Clamping System | Sliding distance |
mm |
300 |
360/400 |
360/400/450 |
450/550 |
600/650/700/800/850 |
700/800/850 |
800/900 |
| Clamping distance |
mm |
150 |
200 |
200 |
250/200 |
350/250/200 |
350/250 |
400/350 |
|
| Open stroke |
mm |
160-310 |
160-360 |
180-380/160-360 |
230-480/180-380/160-360 | 330-680/250-500/240-440 | 380-730/330-680/300-550 |
420-820/380-730 |
|
| Clamping force |
kn |
50 |
80 |
90 |
100 |
125/180 |
180 |
200 |
|
| Power consumption | Total power |
KW |
14-16/23-25 |
24-26/42-45 |
37-41/48-52 |
44^16/59-63 |
72-78 |
80-110 |
136-140 |
| Air pressure |
MPa |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
|
| Air consumption |
m3/ min |
0.6/0.4 |
0.8/0.4 |
0.8/0.6 |
1 /0.8 |
0.8 |
1 |
1.1 |
|
| Water consumption |
m3/ h |
0.6/1 | 1/1.2 |
1/1.2 |
1.2/1.5 |
1.5 |
2 |
2.2 |
|
TECHNICAL SPECIFICATION
1.The number of die head and the clamping stroke listed in the above are set for standard models. Capacity of products in different sizes made on one machine must be no more than the plus or minus 20% of the recommended one.
2.One machine, used for producing products with sizes in variety and capacity in big difference, can be designed with die heads in odd number. This design makes it possible to serve one machine in a multi-way by shutting down one or more die head. Take machine “TVHD-1L-3″ as an example, three die heads for 180ml bottle and two die heads for 500ml bottle.
3.The above models can all be upgraded into aHybrid Type” , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould.
4.Above data is for reference only. Tonva retain the right to modify mechanical structure. Equipment purchase is subject to contact.
Factory Workshop
Our Service
Reply the request and take action in24 hours.
Blowing mould and injection mould made at TONVA original company.
100% Quality inspection before the shipment.
Auxiliary machine for complete line.
Provide training service in TONVA company or clinet’s factory.
Customized design is available as requirements.
Engineer for overseas installation is available
Provide consultation service in request.
Sample Room
Custormers
Service Marketing Network
Our machine has been serving customers all over the world.
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Factory For Wet Tissue Bottle Blowing Machine - EXTRUSION BLOW MOLDING MACHINE 1L-30L – Tonva , The product will supply to all over the world, such as: Puerto Rico, Casablanca, Bogota, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
By Genevieve from Muscat - 2018.06.12 16:22
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Chloe from Turin - 2017.02.18 15:54
Products categories
-
Super Lowest Price China Taizhou Blowing Machin...
-
100% Original Factory 5 Liters Blow Molding Mac...
-
Popular Design for Plastic Water Bottle Manufac...
-
Hot New Products Sbr Blow Moulding Machine - H...
-
Wholesale Dealers of Pet Bottle Machine - mine...
-
New Fashion Design for China Adhesive Bottle Ma...